Cyclo Drive Reducer

Cycloidal pinwheel reducer is a up-dated of latest type transmissing machine designed with K-H-V less tooth engagement and the cycloidal pin steering wheel clenching device, which are trusted in drive and reducing of textile and dying, foodstuff, mining and metallurgy, Essential oil and chemical job machinery etc, cranes, conveyors and Industry. various fields.

1. Gear is made from high durability low carbon alloy steel by carburizing and quenching. The hardness of tooth area can reach HRC58-62. CNC grinding technology is used for all good contact overall performance, gears and with large precision
2. high transmission performance: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable procedure and low noise;
4, compact structure, light-weight, long service life and high bearing capability;
5. easy to assemble, disassemble and check.

Operation specifications and precautions
1.High modularization design: various equip with various motor or other power suggestions conveniently.Same machine type may equip with various power motor. It is easy to recognize the combination and
junction between every equipment type.
2.Transmission ratio: good division, wide scope. The combined machine type may form very large transmission ratio, i.e. productivity very low rotary speed.
3.Form of assembly: the positioning to be installed isn’t limited.
4.High strength, compact: the box body is constructed of excessive strength cast iron. Gear and equipment shaft adapts the gas carbonization, quenching and excellent grinding process, therefore the bearing potential of unitvolume is substantial.
5.Long life: Beneath the condition of appropriate type chosen (including choosing suitable operation parameters)normal operation and maintenance, the life span of main parts of speed reducer (except wearing parts) shouldn’t be less than 20000 hours. The putting on parts include lubricating bearing, oil seal and essential oil.
6.Low noise: because main elements of speed reducer are processed, assembled and tested critically,which means noise of speed reducer is usually low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer

1. High speed ratio and efficiency
Single stage transmission can reach to at least one 1:87 of speed-straight down ratio and the efficiency is usually a lot more than 90%. If use multi-speed travel the speed-down ratio can be bigger.
2. Compact
Being adapted epicyclic tranny basic principle, the input and productivity shaft are at same axis middle, it is compact.
3. Smooth and steady run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the device part is stable, the vibration and noise is bound anyway content.
1. Large deceleration ratio
A high deceleration ratio of 1/30-1/320 can be acquired.The structure is simple, but it can understand high reduction ratio machine.
2. Small gear clearance
The Get, which meshes with ordinary gears and has minimal backlash, is vital to the controller business.
3. High precision
Multiple teeth are engaged simultaneously, and there are two gears engaged with 180 degree symmetry. Consequently, the impact of tooth pitch error and cumulative tooth pitch mistake on the rotation precision is relatively average, making the positioning precision and rotation accuracy reach a very high level.
4. Less parts, easy installation
The three basic parts achieve a high deceleration ratio, plus they are all on a single axis, therefore the kit is simple to install and simple to shape.
5. Small in size and light in weight
Compared with the prior gear device, the volume is 1/3, the weight is 1/2, but can buy the same torque ability and reduction ratio, achieving small lightweight.
6 High torque capacity
Flexible wheel material USES special steel with huge fatigue strength.Different from ordinary transmission product, the quantity of teeth meshing accounts for relevant to 30% of the total number of teeth. Moreover, it is in get in touch with with the surface, so that the pressure borne by each gear is reduced and large torque ability can be obtained.
7 High efficiency
The sliding of gear meshing parts is quite small, which reduces the energy loss caused by friction. Therefore, high lowering ratio may be accomplished while maintaining high productivity, and miniaturization of generating motor can be realized.
8. Low noise
The gear meshing cycle quickness is low, the transmission movements force balance, which means operation is quiet, and the vibration is very small.
◆Great speed ratio and great efficiency single-stage transmission can achieve a deceleration ratio of just one 1:87, and the efficiency is a lot more than 90%. If multi-stage transmission is used, the deceleration ratio will come to be larger.
◆Because planetary transmission theory is adopted, the type shaft and outcome shaft are on a single axis line, in order that the machine model can get the smallest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is bigger, and the mechanism of balancing machine parts makes the vibration and voice limited to a minimum.
◆Reliable use and lengthy service life as the primary parts are created from excessive carbon chromium steel, huge strength is usually obtained by quenching (HRC58-62), and rolling friction is used in a few transmission contacts, so the service life is extended.
Cycloid reducer is going to be a cycloid needle teeth meshing planetary transmission principle drive models, is a perfect transmission has various advantages, versatile, and will be both negative and positive operation.

•Big ratio, and substantial efficiency Smooth operation,

• low noise The usage of reliable,

• long life can reach 50000 hours

• Main parts high-carbon the Ming-steel after quenching treatment (HRC58-62),

• operation and connection with rolling friction, basically very little wear, durable.

• Compact structure,

• small size Because the application of a planetary transmission, the type shaft and the output shaft on the same axis, making the model to obtain the smallest possible size.

• Reasonable design, easy repair, and breakdown easily install,

• minimal number of parts in addition to simple lubrication, cycloid reducer trusted by an individual.
(1)Size above PL/PF120(including)high torque products adopt essential double wall planet pinion increase the output strength, precision and carrier.

(2).Hoop clamp coupling have five connection ways suited to different application environments.

(3).Size over PL/PF120(including)precision and high strength integral inner gear casing, processed in a single station,which eliminate the cumulative error and assembling error of split type.Remove casting process;adopt scorching of forging process, that will decrease the blank material defects.

(4).The meshing equipment adopt shaving procedure after carburizing and quenching,which much easier to make gear area smooth and high precision,decrease the temperature rising due to gear area gluing and friction.
This series worm-gear reducer was built after RV worm microreducer, that have a complete norm, wide speed for selection, and several mounting positions. Its performance and mounting dime nsions conform the same sorts of foreign.
The combination of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square beautiful shape, shape, low noise, radiate heat efficiently and compact structure.
Great sealing and adaptability.Its combo with T gear reducer and MB/MBN variator may meet all types of speed requirement.


pto yoke

As one of leading pto yoke manufacturers, suppliers and exporters of mechanical products, We offer pto yoke and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of pto yoke

Recent Posts