We We are aiming to fulfill the calls for of the consumers close to the entire world.. a specialised supplier of a full selection of chains, sprockets, gears, equipment racks, V-belts, couplings and reducers, pto shaft, agricultural gearboxes….- EPG Team the greatest agricultural gearbox and pto factory in China with 5 diverse branches. For a lot more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
Manufacturing unit ept Tube Ma ept Machine One Screw Extruding Line
PE Pipe Application:
Agricultural Irrigation drinking water supply&Sweage drainage pipe&Discharge technique&Gas supplly method&Architectural drinking water source.
Production Flow of Pipe Manufacturing Line:
Material →Color Mixer →Automatic Feeder→Hopper Dryer →Single Screw Extruder →Extrusion Mould & Calibrator → Vacuum Calibration Cooling Tank → Spray Cooling Tank →Printer → Haul-off Unit →Cutter →Stacker or Coiler
Attributes of Pipe Machiner:
1- 30m/min of maximum lineal extrusion velocity, massive potential and lower energy intake, and reached multi- layers co extrusion with 1-5 levels.
2- The copper bush is far more use-resisting and stop material leakage which can guarantee a stable operating of extruder.
three- Material feed via spiral groove, productive transmission and can properly minimize again-stress on extruder.
4- Special style (barrier, shearing and mixing zone) assures a uniformed plasticizing impact, and can minimize the strain on the screw which assures a substantial pace and stable output potential.
five- High torque equipment box has a sensible figuration, compact design, lower noise, higher carrying capacity, higher transmission efficiency can guarantee extended-time trouble-free operation
6- PCA(pipe air cooling system) of die head largely increase the extrusion pace and reduce the cooling length of extrusion line, and improve top quality of internal pipe surface area
seven- Intelligent PLC controlling technique with human-helpful interface make the operation effortlessly and conveniently
eight- Chip-free of charge cutter ensuing flat and clean cutting surface of pipe.
Main Technical Parameter:
Machine model |
Pipe diameter | Vacuum Calibration Tank | Spray Cooling Tank | Haul-off unit | cutter | ||||
Vacuum pump | Drinking water pump |
Length(mm) | Water pump |
Length(mm) | caterpillar Quantity | Motor | Cutting type | ||
HDPE63 | φ16mm-φ63mm | 3kw*2 | 3kw*2 | 6000mm | 3kw*1 | 6000mm | two | one.5kw*two | No dust cutter |
HDPE-a hundred and ten | Φ40mm-φ110mm | 4kw*2 | 3kw*2 | 6000mm | 3kw*1 | 6000mm | two | 3kw | No dust cutter |
HDPE-160 | Φ50mm-φ110mm | 4kw*2 | 4kw*2 | 6000mm | 4kw*1 | 6000mm | three | one.1*3 | Planetary cutter |
HDPE-250 | Φ75mm-φ250mm | five.5kw*two | 5.5kw*two | 6000mm | 4kw*one | 6000mm | three | 1.1kw*3 | Planetary cutter |
HDPE-315 | Φ110mm-φ315mm | 5.5kw*two | five.5kw*two | 6000mm | five.5kw*one | 6000mm | four | 1.1kw*four | Planetary cutter |
HDPE-630 | Φ315mm-φ630mm | 7.5kw*two | seven.5kw*two | 6000mm | 7.5kw*one | 6000mm | 6 | 1.1kw*6 | Planetary cutter |
HDPE-800 | Φ400mm-φ800mm | five.5kw*2(2m) | five.5kw*2(2m) | 6000mm | 5.5kw*2 | 6000mm | 8 | 1.1kw*eight | Planetary cutter |
seven.5kw*2(10m) | seven.5kw*2(10m) | ||||||||
HDPE-1200 | Φ630mm-φ1200mm | 5.5kw*2 | seven.5kw*2 | 6000mm | seven.5kw*2 | 6000mm | 10 | 1.1kw*ten | Planetary cutter |
Device photograph:
Extrusion device
Vacuum Calibration Cooling tank & Spray Cooling tank
Haul-off Unit
Planetary Automobile-Cutter
Plastic Pipe Stacker
If you have any concerns, remember to speak to us:
Mob/Watsap/Wchat:+86 18915692496
The use of unique tools manufacturer’s (OEM) element figures or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating item use and compatibility. Our firm and the listed replacement elements contained herein are not sponsored, approved, or produced by the OEM.