We – EPG Group the greatest Chain and agricultural gearbox manufacturing unit in China with 5 distinct branches. For far more information: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
Our solution range also covers locking assemblies (clamping elements/locking device), taper bushes, QD bushes, bolt-on hubs, pto shaft, agricultural gearboxes,torque limiters, shaft collars, motor bases and motor slides, chain detachers, chain guides, common joint, rod ends and yokes. “We are usually serving our consumers with our greatest merchandise.” EPT chains, each common and non-common, are made of: ○ Higher quality steels: proportions and adapted chemical composition for the diverse chain areas ○ The most efficient production procedures: • Specific method for the manufacturing of bushes improving the chain wear resistance ( EPT know-how) • Plates produced by multi-stage processing instruments making sure a regular pitch ( EPT engineering) ○ Ample mechanical and warmth treatments of chain elements: • Shot peening • Surface finishing • Circumstance hardening, carbonitriding, quenching, tempering … • EPT®treatment • Freezing remedy • Corrosion protection coatings (GEOMET, zinc, nickel plating, …) guidance needed.
Drawing&requirements(some examples)
Sugar chains(intermediate carrier chains)
Chain No. | P | E | T | H | D | A | R | F | W | Common Ultimate Strength |
1131 | 152.four | 39.63 | nine.fifty three | fifty.80 | 19.05 | ninety nine.00 | 28.sixty | seventy six.twenty | sixty six.00 | 209 |
09060 | 152.four | 38.ten | 9.65 | 50.eighty | 19.05 | ninety seven.00 | 28.70 | 69.85 | 88.ninety | 270 |
09061 | 152.forty | 38.10 | 9.65 | fifty seven.fifteen | 19.05 | ninety seven.00 | 28.70 | 69.85 | 88.90 | 380 |
1796 | 152.4 | 38.10 | nine.65 | fifty seven.15 | 22.23 | ninety nine.00 | 31.seventy five | 69.eighty five | 111.one hundred twenty five | 450 |
09063 | 152.four | 38.10 | 10.30 | sixty one.ninety | 23.83 | 102.10 | 31.seventy five | 76.twenty | one hundred.00 | 630 |
2198 | 152.4 | 38.ninety six | 12.70 | fifty seven.fifteen | 22.35 | 112.00 | 31.seventy five | seventy six.twenty | ninety nine.31 | 450 |
EPT sugar chains
•Welded metal chains for feeding&washing tables
•Combination chains for feeding$washing tables
•Drop forged chains for feeding&washing tables
•Main cane&auxillary carrier chains
•Outboard roller cane carrier chains
•Intermediate carrier chains
•Intermediate provider chains(FG attachments)
•Intermediate carrier ca EPT hyperlink chains
•Forged inter carrier chains
•Diffuser chains
•Juice filter squander elevator chains
•Bagasse conveyor and elevator chains
•Sugar bucket elevators
•Boiler grate chains
•etc
Welded metal chains(slender collection)
Chain No. | Average pitch | E(mm) | Sidebar | Pin | Barrel | F(mm) | Min. Ult toughness(KN) | ||
T(mm) | H(mm) | D(mm) | A(mm) | R(mm) | |||||
WR78 | 66.27 | 25.forty | 6.forty | 31.75 | twelve.70 | 75.00 | 21.34 | fifty one.00 | one hundred twenty.00 |
WH78 | sixty six.27 | twenty five.forty | 6.forty | 31.seventy five | twelve.70 | 75.00 | 21.34 | fifty one.00 | one hundred twenty.00 |
WR78XHD | 66.95 | twenty five.40 | nine.50 | 31.seventy five | fourteen.29 | 82.00 | 25.forty | 50.80 | 146.00 |
WH78XHD | 66.95 | 25.forty | 9.fifty | 31.75 | fourteen.29 | eighty two.00 | twenty five.40 | 50.eighty | 163.fifty |
WR82 | 78.10 | 28.58 | 6.forty | 31.seventy five | fourteen.29 | eighty two.thirty | twenty five.forty | 57.15 | 133.fifty |
WH82 | seventy eight.10 | 28.58 | 6.forty | 31.seventy five | 14.29 | eighty two.30 | 25.forty | 57.15 | 160.00 |
WR82XHD | seventy eight.10 | 28.60 | nine.70 | 38.ten | 19.05 | ninety six.50 | 31.seventy five | 60.ninety | 224.thirty |
WH82XHD | 78.ten | 28.sixty | nine.70 | 38.ten | 19.05 | 96.50 | 31.75 | sixty.ninety | 254.00 |
WR124 | one hundred and one.60 | 38.ten | nine.70 | 38.ten | 19.05 | 107.00 | 31.75 | seventy one.40 | 240.00 |
WH124 | one zero one.sixty | 38.10 | 9.70 | 38.10 | 19.05 | 107.00 | 31.75 | 71.forty | 250.00 |
WR124XHD | 103.20 | 38.10 | 12.70 | fifty.eighty | 25.forty | 119.fifty | 44.forty five | 76.20 | 378.00 |
WH124XHD | 103.20 | 38.ten | 12.70 | fifty.80 | 25.40 | 119.fifty | 44.forty five | 76.twenty | 542.00 |
WR106 | 152.40 | 38.10 | nine.70 | 38.ten | 19.05 | 107.00 | 31.75 | sixty nine.85 | 240.00 |
WH106 | 152.forty | 38.10 | nine.70 | 38.10 | 19.05 | 107.00 | 31.seventy five | sixty nine.eighty five | 250.00 |
WR106XHD | 153.sixty seven | 38.10 | 12.70 | fifty.eighty | twenty five.forty | 120.twenty | forty four.forty five | seventy six.20 | 530.00 |
WH106XHD | 153.67 | 38.ten | twelve.70 | fifty.eighty | twenty five.forty | one hundred twenty.20 | 44.forty five | 76.20 | 542.00 |
WR132 | 153.sixty seven | 76.20 | twelve.70 | 50.eighty | 25.forty | 156.00 | forty four.45 | 112.30 | 520.00 |
WH132 | 153.sixty seven | seventy six.twenty | 12.70 | 50.eighty | 25.40 | 156.00 | forty four.forty five | 112.thirty | 542.00 |
WR132XHD | 153.67 | 76.twenty | 115.88 | 50.eighty | twenty five.forty | 168.86 | forty four.45 | 118.60 | 540.00 |
WH132XHD | 153.67 | seventy six.twenty | 15.88 | 50.80 | twenty five.forty | 168.86 | forty four.forty five | 118.60 | 543.00 |
WH150 | 153.sixty seven | 76.20 | twelve.70 | sixty three.fifty | twenty five.40 | 156.00 | forty four.fifty | 112.thirty | 620.00 |
WR157 | 153.sixty seven | seventy six.twenty | 15.ninety | sixty three.50 | 29.10 | 171.00 | 44.fifty | 117.50 | 796.00 |
WH157 | 153.67 | seventy six.twenty | fifteen.90 | 63.50 | 29.ten | 171.00 | 44.fifty | 117.fifty | 820.00 |
Welded metal chains(broad serries)
Chain No. | Average Pitch | E(mm) | Sidebar | Pin | F(mm) | Min. Ult. Strength(KN) | ||
T(mm) | H(mm) | D(mm) | A(mm) | |||||
WDH102 | 127. | 162.00 | nine.70 | 38.ten | 19.05 | 232.fifty | 197.00 | 226.7 |
WDH104 | 152.4 | 104.seventy eight | 9.70 | 38.ten | 19.05 | 173.30 | 136.53 | 225.7 |
WDH110 | 152.4 | 228.sixty | 9.70 | 38.ten | 19.05 | 296.00 | 260.fifty | 235. |
WDH113 | 152.4 | 228.sixty | 12.70 | 38.ten | 22.23 | 311.fifty | 270.20 | 297.eight |
WDH112 | 152.4 | 222.twenty five | 12.70 | 50.80 | 22.23 | 301.60 | 260.50 | 250. |
WDH116 | 203.two | 228.60 | nine.70 | 38.ten | 19.05 | 395.00 | 358.78 | 250. |
WDH480 | 203.two | 279.40 | twelve.70 | fifty.eighty | 22.23 | 366.ninety | 323.85 | 311.5 |
WDH480XHD | 203.2 | 279.40 | 15.88 | 50.80 | 25.forty | 380.eighty five | 330.twenty | 543.0 |
More chains are as follows
•Palm oil chains
•Cement chains
•Mining chains
•Waste water therapy chains
•Steel pintle chains
•Hoisting chains
•Forged chains
Payment phrases
T/T and L/C are mainly available
Shipping &packaging
Delivery ways: By sea or by air
About us
• EPT Industrial Holding Co., Ltd situated in HangZhou City, ZheJiang Province, China, has a lot more than twenty many years of experience in this sector.
•We emphasis on: Welded chains, Ca EPT chains, EPT chains, Solid chains, Stainless Metal Chains, Sprockets, Gears and etc.
•All our stHangZhourd items are manufactured according to AISI / JIS/ISO stHangZhourds. For non-stHangZhourd types, drawing will be submitted for acceptance based on samples or offered drawings
Our rewards
Substantial quality: EPT has carried out a strict and comprehensive good quality manage method, which ensures that every single chain can meet up with quality requirements of customers and all chains have been strictly inspected prior to packaging.
Competitive value: EPT usually source the be EPT price! We in no way cease striving to discover new approaches to decrease our co EPT based mostly on trying to keep the quality so that we can offer you our buyer a competitive cost.
Quick Supply time: We are committed to work hard to ensure that every cargo of our items is safe and punctual. We have a lot of partners which usually give the mo EPT fast means of transportation.
Excellent support: EPT has different collection and method EPT for different stHangZhourds and we are dedicated to providing the be EPT service.
Large output: EPT has skilled gear for sugar chains. We have the ability to create much more than twenty, 000 meters /month
OEM recognized: We acknowledge OEM operate. EPT can manufacture sidebars, bushes, pins and rollers of chains as customers’ ask for.
FAQ
1. What is the creating procedure?
Generation procedure like uncooked material cutting, machine processing, grinding, accessories cleansing, assemble, cleaning, stoving, oil coating, cover urgent, screening, deal.
2. How to management the goods top quality?
Combining superior tools and rigid management, we supply high stHangZhourd and top quality chains for our customers all over the world.
3. What is the transportation?
If small quantity, we sugge EPT to deliver by convey, this kind of as DHL, UPS, TNT FEDEX. If a large volume, by sea.
4. Can we layout packaging?
Sure. We can make customer’s possess packing.
five. Can you give OEM service?
Indeed, we work on OEM orders. Which means dimensions, amount, design, packing resolution, and so on will count on your requests And your brand will be customized on our items.
The use of first products manufacturer’s (OEM) component numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our company and the outlined replacement areas contained herein are not sponsored, approved, or manufactured by the OEM.