We – EPG Group the bigge EPT Chain and agricultural gearbox factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13 0571 88828
Electrostatic spraying & toa EPT suspension chain conveyor chain
Processing the non-standard chains by your drawing
overhead conveyor for powder coatingline
| Chain Pitch | P150 |
| P200 | |
| P250 |
Chain maintenance and precautions
Lines after the installation, check whether there is different sound transmission seat, adju EPT the seat is flexible and scalable,Bend and lift part if there is a different sound, chain running jitter, if there is any abnormal ,please ruled out.
After line normal operation, in the chain of the easy friction point injection of solid high temperature grease,After injection, using the cup-feed oiler and tanker injection high temperature lubricating oil .
Regularly check the chain operation and lubrication condition, use of inferior oil residue jam happened.
The chain or powder into the chain should be clear in time.
bend and lifting parts should be replaced in a timely manner.
Grasp the actual temperature oven, cannot make the chain more than normal temperature for a long time running.
The chain Can’t be made operation in the distortion of environment.
The operation of the complex environment and the small turning radius can make chain damage and deformation,
The design should consider the rationality of operation.
5 tons standard chain
Features: The chain designed for suspension conveyor ,
With large Angle of curved space, easy to install, suitable for general situation
5 tons horizontal wheel heavy chain
Features: change the standard wheel to negative heavy, to improve the bearing capacity and wear resistance, prolong service life, applicable to many curved or higher temperature in a production environment.
5 tons of vertical wheel heavy chain
Features: change the vertical wheel to negative heavy, reduce the chain after lifting angle when the resistance, increase the bearing capacity and wear resistance, suitable for frequent lifting or higher temperature in the production environment
5 tons horizontal/vertical wheel heavy chain
Features: change the horizontal and vertical chakras are to bear the heavy, its bearing capacity and abrasion resistance for this kind of chain of solidifying, apply to the circuit is very complicated, hanging heavier workpiece and higher temperature production environment
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.
