Stainless 6v dc motor high torque Cheap made in China – replacement parts – in Munich Germany Steel Oil Drums Production Line with top quality

Stainless 6v dc motor high torque Cheap  made in China - replacement parts -  in Munich Germany  Steel Oil Drums Production Line with top quality

We – EPG Team the greatest worm gearbox, couplings and gears manufacturing facility in China with 5 distinct branches. For a lot more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

Total metal drum manufacturing line

 

I. Raw materials use/production capacity
 

Plate thickness (mm) Finihed drums (pcs/T) Creation ability (kg/pc)
1.two 41 21.5
1.0B Up and base handles 1.2 47 19
Drum entire body 1.
1. 50 eighteen
0.9B Up and bottom addresses 1. 54 16.8
Drum entire body .9
0.9 56 16.2
.eight   97 ten.28

 

II. Total metal drum producing amenities

A. Entrance area products
1. Decolier
2. Hydraulic Up-coiling system
3. Hydraulic supporter
4. Side deviation rectifying system
five. Sizing & flattening machine
six. Slicing device – for drum physique
seven. Chopping equipment – for squander sheet
eight. Arch condition guiding unit
nine. Stac ept automobile
ten. Hydraulic method
eleven. Electrical handle program
12. Top & Base go over conveyor system

1.Hydraulic Up-Coiling  Device

   a) Up-Coiling Help Platform is for storing metal coil and facillitate Substance Feed Trolley for providing substance.

   b) Substance Feed Trolley is utilised for have steel coil.. It is operated with hydraulic program to thrust cylinder for

   reciprocating linear movement and equipment box to produce steel coil in parallel to the centre of uncoiling device so as to

   assure the fixing.

2.Decoiler & Hydraulic Supporter

a)Uncoiling width: 916-1320mm

b)Plate thickness: .6-1.2mm

c)Motor power: 5.0KW

d)Uncoiler potential: 10t

e)Within diameter: ¢470-520mm, Outdoors diameter: ≤¢1200

f)Machine dimensions: 3900x1500x1940(mm), Whole bodyweight: 5T

three.Sizing &Flattening Machine
Quick introduction:7 rollers doing work,servo computerized sizing,worm and gear adjust the leveled plate thickness.

Operate:The clearances of up and down rollers can be altered by the upper hand-wheel although figure can be revealed by dial indicator. The operation linear speed is adjusted step-considerably less. It can be controlled by the signal of mid-bridge for high and low speed change. 

Main technics:

a)Plate width: 916-1320(mm)

b)Plate thickness:.6-1.2(mm)

4. Reducing Equipment
Perform: Lower the leveled metal plate into drum body.

Primary technics:

a)Plate width:≤1500mm

b)Plate thickness:≤3mm

c)Motor power: 3.0KW

d)Slicing potential:≤20 occasions/min

e)Machine measurement:1800x950x1500(mm),Complete bodyweight: 3T

 5.Hydraulic Station

Function:Supply oil for the oil cylinder of decoiler, lifting unit,uncoiling supporter,and overturn device to make positive stably operating.

Principal technics:

a)Motor energy:7.5KW

b)Equipment dimension:800x800x1500(mm),Complete bodyweight: .5T

six.Electric Handle Technique
Perform: Handle the decoiler,flattening equipment and other front part equipments working.

B. Cover products
1. Prime & Base include mould
2. Double loc ept mould
three. 63T urgent device
four. 160T pressing equipment
five. Pre-coiling & Gluing device

1. Prime & Bottom go over mould

Quick introduction:Geared up with two sets of 160T urgent devices

Perform: Punching the bottom protect

Major technics:

a)Motor electricity:eighteen.5KW

b)Wor ept capability:5-26 pcs/min

c)Device measurement:2185x1420x3070(mm),Complete excess weight: fourteen.5T

two.Drum Injection Mould

Short introduction: Equipped with a single set of 63T pressing machine

Double punching mould: punch oil filler and breathable mouth of the bottom go over.

Equipment measurement: 710x480x300(mm)

Overall fat: .5T

Double loc ept mould: lock oil filler and breathable mouth of the bottom cover.

Machine dimensions: 710x480x300(mm)

Overall fat: .5T

Major technics:

a)Motor electrical power: 11KW

b)Device dimensions :1800x1232x2550(mm)

c)Whole bodyweight: 5.5T

3.Pre-Coiling & Gluing Machine

Limited introduction: Pre-coiling machine for the base include, cylinder push the cam to work, automatic glue- spaying system.It has rewards of protection,stablity, smooth edging.

 Main technics:

a)Device dimension:1600x1400x1350(mm)

b)Complete excess weight: 4.5T

C. Center area products

1. Stac ept desk
2. Circle-rolling machine
three. Seam welding equipment
4. Edging & Beading machine
5. Corrugation (W Rib) device
6. Edge-curling equipment
7. Convey device
eight. Electric powered management program
9. Leakage chec ept device

one.Circle-rolling Equipment

Quick introduction:3 rollers operating.

Major technics:

a)Rolled plated width:≤1100mm

b)Plate thickness:.6-1.2(mm)

c)Circle diameter:≤570mm

d)Motor electricity:1.5KW

e)Device measurement:2200x750x1300(mm),Total excess weight: 1.5T

two.Seaming Device(BH-one hundred fifty-5Z)

Brief instruction:This automatic seaming equipment dismisses the place welding procedure,it is our freshly  developed drum seaming device.All of components adopts domestic excellent uncooked materials,cupreous welding rollers.

Main technics:

a)Welding Device capability:150KVA

b)Driving type: pneumatic 

c)Existing: alternating present

d)Frequency assortment: substantial frequency

e)Wor ept theory : contravariant 

3.Edging&Beading Device

Quick introduction:controlled by PLC,hydraulic push

Principal technics:

a)Beading height:≤14mm

b)Drum top:894-905(mm)

c)Hydraulic method stress:8Mpa

d)Air pressure:.1Mpa

e)Device size:3700x700x1600(mm),Complete fat: 5T

Hydraulic Station:

Principal technics:

a) Equipment size: 1800x860x1700 (mm)

b) Total bodyweight: 1T

c) Motor electricity: 22KW

four.Corrugation (W rib) Equipment

Short introduction:controlled by PLC,hydraulic travel

Main technics:

a)Corrugating height:≤3mm

b)W rib height:≤9mm

c)Drum height:884-895(mm)

d)W rib place:280mm

e)Motor electrical power:11KW

f)Machine dimension:4500x650x2100(mm),Total fat: 7T

Hydraulic station:   

a)Equipment dimension:1800x860x1700(mm)

b)Whole fat: 1T

c)Motor electrical power: 7.5KW

5.Edge-Curling Device

Short introduction:controlled by PLC,hydraulic push,7 layers edge curling.

Principal technics:

a)Drum height:886-897(mm)

b)Motor power:45KW

c)Machine measurement:4800x1300x2200(mm),Total weight: 13T

Hydraulic station:   

a)Machine size:1800x860x1700(mm)

b)Complete bodyweight: 1T

c)Motor power: 7.5KW

6.  Leakage Chec ept Device

Short introduction:Handbook/computerized control,pneuma lock.

Primary technics:

a)Chec ept drum diameter:560-570(mm)

b)Drum top:886-897(mm)

c)Strain:.03Mpa

d) Device dimension:2530x700x1100(mm),Total excess weight: 2T

seven.Multi-area Express Device

Brief introduction:Express the drum body to be edged,beaded,Corrugated W rib strengthened and sealed bottom include with PLC managing.

Principal technics:

a) Motor electricity:4.0KW

b) Equipment size:11000x2100x1000(mm)

c) Complete fat: 3T

D. Rear part products
1. Front area trans-line
two. Degreasing & Phosphorization space
3. Washing & Drying area
4. Overturn gear
five. Portray place
6. Entrance drum-separation device
7. Drying room right after painting
8. Bck drum separation equipment
nine. Air cooling method
ten. Rear section trans-line
11. Electrical handle method

one. Degreasing & Phosphorization Space

Limited introduction: This portion is utilised to transport the drums,controlled by PLC, adopts spraying device to automatic thoroughly clean the coil, phosphorize and washing the grease on the drums. The conveyor unit adopts exceptional steel, inwalls are created of  1mm steel plate.

Main technics:

a)Device dimension:36000x2110x2060(mm)

b)Total weight: 30T

2. Washing & Drying Area

Quick introduction:Drying the h2o on the surface of the drum, managed by PLC.The entire device adopts fuel heating gadgets.Fan is put in on the prime of the area, so that very hot and biking wind can be produced to velocity up the drying.

Principal technics:

a) Motor energy:25KW

b) Equipment size:20000x1920x3600(mm)

c) Total bodyweight: 25T

three.Portray Area(double shades)


Purpose:  The conveyor system is managed by PLC, rotating table make the drums carefully, painting program paint the drums in & outside with the spray gun. One color or various can be option. Method of drinking water-curtain spraying dispels spraying smoke.Nozzle adopts Nordson Brand name, Portray tools is produced of Chang Jiang.

Major technics:

a) Motor electricity: 55KW

b) Machine measurement: 7400x4990x3600(mm)

c) Total fat: 15T

four.Entrance Drum Distributor

Function: Transportation the drums to the conveyor line of outdoors painting&stiffening area, the cylinder is controlled by PLC.

Major technics:

a) Motor electricity: 2.0KW

b) Machine dimension: 1500x1050x800(mm)

c) Total fat: 1T

five.Drying Line after Portray

Function: The conveyor device is managed by PLC, adopts fuel heating inwall of the space is geared up with heating tubes. Supporter is put in on the best of the area, so that dry the paint.

Primary technics:

a) Motor energy: 35KW

b) Equipment dimension: 36000x2100x4300(mm)

c) Total bodyweight: 30T

6.Down-drum Roller Trans-line

Function: The system transports the dried drums to the ground.

Principal technics:

a) Motor electricity: 1.5KW

b) Machine measurement:2000x900x800(mm)

c) Whole fat: .3T

seven.Overturn Tools

Purpose: Modify the point out of drums from horizontal to vertical, so that it will be much easier to paint, managed by Cylinder.

Major technics:

a) Equipment size: 1400x690x850(mm)

b) Complete excess weight: .5T

 

 

 

 

 

 

   

 

 

 

 

 

/ The use of authentic tools manufacturer’s (OEM) portion quantities or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating item use and compatibility. Our business and the detailed substitution areas contained herein are not sponsored, approved, or produced by the OEM. /

Stainless 6v dc motor high torque Cheap  made in China - replacement parts -  in Munich Germany  Steel Oil Drums Production Line with top quality

Stainless 6v dc motor high torque Cheap  made in China - replacement parts -  in Munich Germany  Steel Oil Drums Production Line with top quality

pto yoke

As one of leading pto yoke manufacturers, suppliers and exporters of mechanical products, We offer pto yoke and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of pto yoke

Recent Posts